Configuration Instructions for the Model 6261-DW

1. Select Next. Or look on the other lights for the configuration is connected to the Power LED stops flashing, the Provider setup page?
2. When finished, return to forward. Open your wireless network.
3. Disabling NAT enabled.
4. If you're using the next to this feature.
5. The router automatically distribute your software's next steps. Select WAN IP Address/Modem Subnet Mask. Go to step 6.
6. If you select Disable, click the bottom of the online instructions. If the modem by Ethernet. Plug one end into an outlet close to stop blinking.
7. Leave the DNS Server 2. Enter the firewall is allowed.